Lawn Irrigation with Harvested Rainwater in Utah

Using harvested rainwater for lawn irrigation in Utah is a practical way to reduce your water bill and conserve municipal supplies. With 12.2 inches of average annual rainfall, a 1,500-square-foot asphalt shingle roof in Utah can collect approximately 9,421 gal per year. lawn irrigation requires roughly 75 gallons per day, during the growing season (April through October). With this setup, rainwater can meet approximately 58.7% of your lawn irrigation needs, saving an estimated $37.68 per year.

Annual Harvest 9,421 gal 1,500 sq ft roof
Annual Demand 16,050 gal lawn irrigation
Demand Met 58.7% of lawn irrigation
Rec. Tank 1,500 gal storage capacity

Monthly Supply vs. Demand for Lawn Irrigation in Utah

The table below shows how your monthly rainwater harvest compares to lawn irrigation demand throughout the year. Green values indicate months where your harvest exceeds demand (surplus water for tank storage), while red values show months where you will draw down your stored reserves. Since lawn irrigation is a seasonal activity, demand is zero from November through March, allowing you to build up tank reserves during the off-season.

Month Harvest (gal) Demand (gal) Balance
January 897 0 +897
February 822 0 +822
March 1,047 0 +1,047
April 1,047 2,250 -1,203
May 1,047 2,325 -1,278
June 523 2,250 -1,727
July 449 2,325 -1,876
August 523 2,325 -1,802
September 673 2,250 -1,577
October 897 2,325 -1,428
November 748 0 +748
December 748 0 +748

Harvest by Roof Size for Lawn Irrigation

A larger roof collection area directly increases your harvest and the percentage of lawn irrigation demand you can meet with rainwater. The table below shows how different roof sizes perform in Utah for lawn irrigation.

Roof Area Annual Harvest Demand Met Rec. Tank Savings/Year
1,000 sq ft 6,280 gal 39.1% 1,000 gal $25.12
1,500 sq ft 9,421 gal 58.7% 1,500 gal $37.68
2,000 sq ft 12,561 gal 78.3% 1,500 gal $50.24
2,500 sq ft 15,698 gal 97.8% 2,500 gal $62.79

Setting Up Rainwater Harvesting for Lawn Irrigation in Utah

Lawn irrigation is the most water-intensive residential use, and harvesting rainwater for this purpose in Utah can dramatically reduce your municipal water consumption. For effective lawn watering, you need a pump-and-pressure-tank system capable of running sprinklers — gravity-fed systems do not provide sufficient pressure. A 1,000-2,500 gallon tank is recommended, connected to your existing sprinkler system through a transfer pump. Many homeowners install a dual-source controller that draws from the rainwater tank first and automatically switches to municipal supply when the tank runs low. Consider reducing your lawn area or switching to drought-tolerant grasses to decrease water demand. In Utah, cool-season grasses go dormant in summer heat and may not need irrigation during the hottest months.

Metal Roof Upgrade: Lawn Irrigation in Utah

Upgrading to a metal roof increases your collection efficiency from 80% (asphalt shingle) to 95%, boosting your annual harvest to 11,186 gal from a 1,500-square-foot roof. This increases your lawn irrigation demand coverage to 69.7% and raises annual savings to $44.74. Metal roofs also last 40-70 years compared to 20-30 years for asphalt shingle, and their smooth surface sheds debris more effectively, reducing maintenance on your collection system and improving water quality.

Other Uses for Rainwater in Utah

Explore how harvested rainwater can serve other needs in Utah:

Get Your Custom Estimate

Use our Rainwater Harvesting Calculator to enter your exact roof area, material, and combine multiple uses for a comprehensive harvest analysis. See all rainwater harvesting data for Utah or compare all 50 states.