Garden Irrigation with Harvested Rainwater in Utah

Using harvested rainwater for garden irrigation in Utah is a practical way to reduce your water bill and conserve municipal supplies. With 12.2 inches of average annual rainfall, a 1,500-square-foot asphalt shingle roof in Utah can collect approximately 9,421 gal per year. garden irrigation requires roughly 50 gallons per day, during the growing season (April through October). With this setup, rainwater can meet approximately 88.0% of your garden irrigation needs, saving an estimated $37.68 per year.

Annual Harvest 9,421 gal 1,500 sq ft roof
Annual Demand 10,700 gal garden irrigation
Demand Met 88.0% of garden irrigation
Rec. Tank 1,500 gal storage capacity

Monthly Supply vs. Demand for Garden Irrigation in Utah

The table below shows how your monthly rainwater harvest compares to garden irrigation demand throughout the year. Green values indicate months where your harvest exceeds demand (surplus water for tank storage), while red values show months where you will draw down your stored reserves. Since garden irrigation is a seasonal activity, demand is zero from November through March, allowing you to build up tank reserves during the off-season.

Month Harvest (gal) Demand (gal) Balance
January 897 0 +897
February 822 0 +822
March 1,047 0 +1,047
April 1,047 1,500 -453
May 1,047 1,550 -503
June 523 1,500 -977
July 449 1,550 -1,101
August 523 1,550 -1,027
September 673 1,500 -827
October 897 1,550 -653
November 748 0 +748
December 748 0 +748

Harvest by Roof Size for Garden Irrigation

A larger roof collection area directly increases your harvest and the percentage of garden irrigation demand you can meet with rainwater. The table below shows how different roof sizes perform in Utah for garden irrigation.

Roof Area Annual Harvest Demand Met Rec. Tank Savings/Year
1,000 sq ft 6,280 gal 58.7% 1,000 gal $25.12
1,500 sq ft 9,421 gal 88.0% 1,500 gal $37.68
2,000 sq ft 12,561 gal 100.0% 1,500 gal $42.80
2,500 sq ft 15,698 gal 100.0% 2,500 gal $42.80

Setting Up Rainwater Harvesting for Garden Irrigation in Utah

Garden irrigation is the simplest and most popular application of harvested rainwater in Utah. Start with a single rain barrel connected to a downspout near your garden. For larger gardens, upgrade to a 500-1,000 gallon tank with a drip irrigation system. Rainwater's natural softness and absence of chlorine make it preferred by plants — many gardeners report healthier growth and better yields when switching from municipal water to rainwater. In Utah, focus on capturing spring rains to build reserves for the peak growing season. A timer-controlled drip system connected to your tank ensures consistent watering while minimizing waste.

Metal Roof Upgrade: Garden Irrigation in Utah

Upgrading to a metal roof increases your collection efficiency from 80% (asphalt shingle) to 95%, boosting your annual harvest to 11,186 gal from a 1,500-square-foot roof. This increases your garden irrigation demand coverage to 100.0% and raises annual savings to $42.80. Metal roofs also last 40-70 years compared to 20-30 years for asphalt shingle, and their smooth surface sheds debris more effectively, reducing maintenance on your collection system and improving water quality.

Other Uses for Rainwater in Utah

Explore how harvested rainwater can serve other needs in Utah:

Get Your Custom Estimate

Use our Rainwater Harvesting Calculator to enter your exact roof area, material, and combine multiple uses for a comprehensive harvest analysis. See all rainwater harvesting data for Utah or compare all 50 states.