Lawn Irrigation with Harvested Rainwater in Kansas

Using harvested rainwater for lawn irrigation in Kansas is a practical way to reduce your water bill and conserve municipal supplies. With 28.9 inches of average annual rainfall, a 1,500-square-foot asphalt shingle roof in Kansas can collect approximately 21,980 gal per year. lawn irrigation requires roughly 75 gallons per day, during the growing season (April through October). With this setup, rainwater can meet approximately 100.0% of your lawn irrigation needs, saving an estimated $80.25 per year.

Annual Harvest 21,980 gal 1,500 sq ft roof
Annual Demand 16,050 gal lawn irrigation
Demand Met 100.0% of lawn irrigation
Rec. Tank 1,500 gal storage capacity

Monthly Supply vs. Demand for Lawn Irrigation in Kansas

The table below shows how your monthly rainwater harvest compares to lawn irrigation demand throughout the year. Green values indicate months where your harvest exceeds demand (surplus water for tank storage), while red values show months where you will draw down your stored reserves. Since lawn irrigation is a seasonal activity, demand is zero from November through March, allowing you to build up tank reserves during the off-season.

Month Harvest (gal) Demand (gal) Balance
January 598 0 +598
February 748 0 +748
March 1,495 0 +1,495
April 2,093 2,250 -157
May 2,990 2,325 +665
June 3,140 2,250 +890
July 2,841 2,325 +516
August 2,542 2,325 +217
September 2,093 2,250 -157
October 1,645 2,325 -680
November 1,047 0 +1,047
December 748 0 +748

Harvest by Roof Size for Lawn Irrigation

A larger roof collection area directly increases your harvest and the percentage of lawn irrigation demand you can meet with rainwater. The table below shows how different roof sizes perform in Kansas for lawn irrigation.

Roof Area Annual Harvest Demand Met Rec. Tank Savings/Year
1,000 sq ft 14,654 gal 91.3% 1,000 gal $73.27
1,500 sq ft 21,980 gal 100.0% 1,500 gal $80.25
2,000 sq ft 29,307 gal 100.0% 2,500 gal $80.25
2,500 sq ft 36,632 gal 100.0% 5,000 gal $80.25

Setting Up Rainwater Harvesting for Lawn Irrigation in Kansas

Lawn irrigation is the most water-intensive residential use, and harvesting rainwater for this purpose in Kansas can dramatically reduce your municipal water consumption. For effective lawn watering, you need a pump-and-pressure-tank system capable of running sprinklers — gravity-fed systems do not provide sufficient pressure. A 1,000-2,500 gallon tank is recommended, connected to your existing sprinkler system through a transfer pump. Many homeowners install a dual-source controller that draws from the rainwater tank first and automatically switches to municipal supply when the tank runs low. Consider reducing your lawn area or switching to drought-tolerant grasses to decrease water demand. In Kansas, cool-season grasses go dormant in summer heat and may not need irrigation during the hottest months.

Metal Roof Upgrade: Lawn Irrigation in Kansas

Upgrading to a metal roof increases your collection efficiency from 80% (asphalt shingle) to 95%, boosting your annual harvest to 26,102 gal from a 1,500-square-foot roof. This increases your lawn irrigation demand coverage to 100.0% and raises annual savings to $80.25. Metal roofs also last 40-70 years compared to 20-30 years for asphalt shingle, and their smooth surface sheds debris more effectively, reducing maintenance on your collection system and improving water quality.

Other Uses for Rainwater in Kansas

Explore how harvested rainwater can serve other needs in Kansas:

Get Your Custom Estimate

Use our Rainwater Harvesting Calculator to enter your exact roof area, material, and combine multiple uses for a comprehensive harvest analysis. See all rainwater harvesting data for Kansas or compare all 50 states.